Hughes & Kettner MSM-1 Instrukcja Użytkownika Pobierz pdf (Strona 2)



Ensure the connector fits snugly and the connector markings match the socket’s grooved portion.

Check all connections carefully. Then:



Replace and fasten the chassis cover.



Plug in the AC mains cable. Switch on the power.



Press all front panel buttons, one after the other, to make sure the ATTAX functions properly.



The ATTAX should respond to each button as it did before you installed the module (refer to the

ATTAX manual).



Follow the steps described in Short Instructions to ensure that the MSM-1 functions properly.

CONNECTIONS AND CONTROL FEATURES

1. MIDI IN JACK

The MIDI IN jack is designed to receive MIDI data. Any device capable of generating MIDI data can be

connected here via its MIDI OUT jack. In most cases, a MIDI FOOT CONTROLLER or MIDI EFFECTS UNIT

is the device you will use.

2 MIDI THRU JACK

The MIDI THRU jack is used if you want to relay incoming MIDI messages to an additional MIDI device, e.g.

an effects processor. Simply connect the device’s MIDI IN to the MSM-1 's MIDI THRU. This enables you to

address the ATTAX and one or more additional devices via a single MIDI command.

3 MIDI RECEIVE CHANNEL SWITCH

This five-way DIP switch determines on which MIDI channels the MSM-1 receives MIDI messages. You can

select a single CHANNEL (1 through 16), or all MIDI CHANNELS at once.

MIDI LEARN BUTTON (front panel)

Seite

von

Hughes & Kettner MSM

1 User Manual

22.08.2007

file://C:\Dokumente und Einstellungen\RForse\Desktop\msm1manual.htm

1 2 3 4 5 6 7 8 9 10

Brak uwag

Hughes & Kettner MSM-1 Instrukcja Użytkownika Strona 2